// TOM'S HARDWARE US — HARDWARE & GADGET
Fractal Design Refine 2 Review: Slightly refined
The Fractal Refine 2 is an improvement over the original Refine, even if said improvement isn't really all that significant.
Heavy and difficult to maneuver once assembled (and before assembly)
You should probably be closer to the middle of the recommended weight range
Why you can trust Tom's Hardware
Our expert reviewers spend hours testing and comparing products and services so you can choose the best for you. Find out more about how we test.
Fractal Design is determined to be on, under, and in front of your desk — the PC peripherals company best known for its designer PC cases has just released the Fractal Refine 2 — the second generation of its minimalist, "refined" take on the typical racing-inspired gaming chair.
The Fractal Refine 2 is very similar to the original Fractal Refine, but it's been... refined... just a bit further. It still features a subdued but unmistakable "gaming chair" silhouette, as well as a fairly high level of adjustability and a large, hefty frame. Fractal has definitely made some changes — the 4D arm rests now lock in place, and the tilt limiter, which I found to be way too strong in the original, has been pulled back a little (but not quite enough). The price has also been adjusted — all variations retail for $640, which is on the higher side for a typical racing-style gaming chair. We did like the original Refine, but its scratchy mesh fabric kept it off our list of best gaming chairs — but this time we're taking a look at the fabric version.
The Fractal Refine 2 comes in a heavy box that's so large you might think the chair is already assembled — but it isn't. It's well-packed: all the pieces are individually wrapped and/or boxed, and there's plenty of eco-friendly packing material keeping everything in its place.
The chair comes with all the tools you'll need to assemble it, though there's admittedly not too much assembly. It comes with an allen wrench and several screws — six longer screws for attaching the armrests, two shorter screws for attaching the backrest, and a handful of extra screws, just in case.
Assembly is pretty straightforward and is pretty easy to accomplish alone — unlike most of the traditional racing-style gaming chairs, the backrest of the Refine 2 is quite a bit lighter than the base, and is easy to put into place alone. It also has two pre-placed screws that slot into two holes and slide to "lock" in place, so you don't need to somehow hold the two pieces together and screw them into place simultaneously. (This might not sound that noteworthy, but trust me — many chairs are virtually impossible to put together without a partner because of this.)
I was able to assemble the Refine 2 by myself in about 15 minutes, and the most difficult part was unpacking everything (because the box really is huge). The Refine 2 comes with a large illustrated instruction panel, as well as an information booklet with more detailed instructions.